Counterweight System
Buffer works by moving mass in the opposite direction. This system allows extreme recoil reduction, which increases precision, especially in fast follow-up shots or full auto mode.
Quick Disassembly and Tuning
Partial assembly or disassembly can be done with supplied wrenches, which enable easier maintenance and fine-tuning by adding or removing metal beads inside the inner tube.
Drop-In Design
The buffer is designed to fit perfectly inside an A2 buffer tube. Make sure to follow the instructions to ensure proper functioning.
Compatibility
![](/web/image/228564-3786f416/brand-ar15.png)
AR-15 with A2 Buffer Tube
Chambered in .223 REM / 5.56 NATO, 300 BLK
![](/web/image/233096-522de7ac/bufferinsertion.jpg?access_token=4eb03522-1f04-4f47-9997-a1d32ebc4f4c)
We recommend using AR-15 trigger with leaner hammer geometry. Hammer in cocked/down position should have enough clearance for buffer insertion.
What Comes in the Box?
1 x Armanov Buffer Assembly
Made from Stainless Steel
2 x Assembly Wrench
Made from Zinced Steel
2 mm Metal Beads
with dosing funnel
1 x Breakthrough Battle Born Grease
with PTFE
1 x Hex Key 5 mm
1 x Vulkolan Damper
1 x Spare Buffer Spring
Before first use, please read the provided instruction manual carefully.
![](/web/image/233191-9ec4f027/Size_Grey.png?access_token=111a8929-da53-4cc9-84ca-7347353e2887)
Size
⌀24.5 x 250 mm
![](/web/image/233192-4dc0d38d/Weight_Grey.png?access_token=35f7cc10-f01f-484b-9a5d-918043fcc544)
Weight
245 g (without metal beads)
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.