Zero-Play System
The Zero Play toolhead does not use the original toolhead pins supplied by Dillon. It is bolted with two M3 bolts that lift the toolhead into the uppermost position. When you cycle cases downward, the toolhead does not move, and cases go out in a straight line. Best practice is to loosen M3 bolts slightly before inserting the index shell-plate with case into dies and tightening M3 bolts to the toolhead's best position.
Compatibility
Dillon XL650
Dillon XL750
This toolhead is required for use with RT1500 Electric Case Trimmer.
This combination is commonly used to trim 300 AAC Blackout on the XL650 & XL750.
Armanov Short Trim Die Toolhead for Dillon XL650 / XL750 replaces original Dillon part 62112.
What comes in the Box?
1 x Aircraft-Grade Anodized
Aluminium Toolhead
1 x Hex Key 2.5 mm
2 x Bolts M3 x 20 & Washers
1 x Caliber Sticker
Due to use of high tensile strength aluminum which is harder to anodize,
slight color inconsistencies may occur.
Related Products
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.